An ivory paper tube
for candle gifting.
A lift-off paper tube for one candle jar, with ivory wrap, olive printing and an interior developed around your vessel.
Minimum order: 500 pieces. Start with a photo or a short request.
The starting direction
- Product
- One filled candle jar
- Structure
- Rigid tube & lift-off lid
- Material
- Paperboard & ivory wrap
- Branding
- Single-colour olive print
- Interior
- Supported base; ring if needed
- Supply
- Formed tubes, ready for filling
PACKAGINGFit, finish and pack-out to be confirmed with a physical sample.
Explore this case 6 sections
One jar.
A simple reveal.
A round vessel sits within a formed paper tube. The separate lid lifts away to reveal the amber glass; the tube ships assembled for filling.
For gifting an unlit candle. Remove the candle before use.
Explore paper tube construction ↗︎Support the weight.
Make room to lift.
Develop the opening, base and grip around the finished jar, including its label, lid and filled weight.
- 01
Size for the finished jar.
Allow the widest part to pass the narrowest opening without rubbing the label. Check that the closed lid clears the jar.
- 02
The base supports. The ring locates.
The bottom assembly carries the filled jar. Add a low ring only if the fit trial shows unwanted sideways movement.
- 03
Leave a place to grip.
Keep enough glass accessible above the sleeve while retaining lid engagement. For a deeper jar, trial a lift ribbon.
Need to check your own candle jar? A photo or short description is enough to start.
Discuss my jar fit and tube support ↗︎
Measuring your vessel? Use the candle jar fit guide ↗︎
Have a tube reference? Check inside and outside tube dimensions ↗︎
See a recorded workshop station: Watch paper tube handling ↗︎. The footage shows handling; fit and closure are checked for your product.
Keep the look.
Fit your product.
Start with textured ivory paper and one-colour olive printing. Set dimensions and material grades through sampling.
View the full starting specificationTube, wrap, print, interior and supply
| Part | Starting direction | Confirm for your project |
|---|---|---|
| Tube & lid | Rigid paperboard tube, separate lift-off lid and inner sleeve. | Opening diameter, usable closed height and lid engagement. |
| Outer wrap | Ivory textured paper over the formed tube. | Paper swatch, wrap seam position and finished edges. |
| Branding | Single-colour olive printing and fine lettering. | Ink coverage on the chosen texture. Foil and embossing are optional changes. |
| Inside | Paper lining, supported base and a locating ring only if needed. | Filled-jar support, label contact, sideways movement and grip. |
| Supply | Formed tubes and lids for filling. | Packing responsibility, quantities by size and artwork, and outer-carton layout. |
What changes the quotation?Size, paper, support, artwork and packed volume
Compare available papers and keep the one-colour print before adding special finishes. Review quantities by jar size and artwork, then compare outer-carton volume alongside unit price. Preserve the base support and removal space your jar needs.
Need accessories or flat delivery?Compare two alternatives to this single-jar tube
Candle + accessories
A compartmented gift box can present several pieces side by side, with separate support and access.
Review my gift set ↗︎Flat-pack supply
Compare a folding carton for storage space, assembly work and protection of the filled jar.
Compare flat delivery ↗︎Develop your tube
with YDP.
Start with a product photo. Sales will discuss sample scope, costs and timing before a fitted sample is prepared.
What will the sample review check?Filled-jar fit, decorated finish and pack-out
For a fitted sample, provide a finished jar or dimensioned drawing, filled weight, label and any jar lid. This design's fit, finish and pack-out remain to be validated.
- 01 / STRUCTURE
Fit & removal
Try insertion, closure and lifting. Check label contact, base movement and whether a ring is needed.
Agree: usable dimensions, base construction and grip.
- 02 / FINISH
Paper & print
Review ivory paper and olive print under agreed lighting, including fine lettering, seams and edges.
Agree: a physical finish reference for the order.
- 03 / PACK-OUT
Packed-product checks
Plan outer cartons, dividers or cushioning and handling tests for your delivery route.
Agree: packing arrangement and acceptance checks.
The decorative tube alone does not establish shipping protection; review the complete packed product.
Choose your next packaging decision.
Compare candle packaging options ↗︎
Choose a tube or gift box around the filled vessel.
Check paper tube dimensions ↗︎
Compare usable inside dimensions, lid fit and base support.
Measure your candle jar ↗︎
Prepare the vessel dimensions and filled weight for a fitted sample.
Beyond candles.
Keep the cylindrical presentation; adapt the interior to your product.
Skincare jars
Size around the cap and label, with a grip suited to a shorter jar.
Home fragrance
Recheck bottle height and neck clearance. Give reeds or accessories their own space.
Bath & body
Use a sealed primary container and match the base support to its filled weight.